Series A Pressure-Lok

  • Integral sample storage valve - Actuated by turning the nosepiece
  • Positive rear flange plunger stop - Prevents plunger from blowing out of barrel at elevated pressure
  • Modular construction - All components may be quickly disassembled for easy cleaning or replacement
  • Leak-tight to 250 psi - Liquids and gases

Turn the nosepiece counterclockwise two turns and the valve is closed.Insert the needle through the septum, then start pushing the plunger as you turn the nosepiece clockwise. Carrier backflushing is eliminated, resulting in sharper peaks and better separations. When the plunger is fully depressed, the plunger face comes into firm, flush contact with the bottom of the front packing, forcing essentially all of the sample out – there is virtually no compressible dead volume remaining. The very small internal diameter of the needle also contributes to the dead volume minimization. In addition to the characteristics which make it unique, the Series A gas syringe has all the standard Pressure-Lok® features such as a PTFE plunger tip, PTFE-sealed needle, and ultrasmooth bore.


  • view 
Series A Syringe 100µl, RN - incl. Needle 0.029" x 0.012" x 2.25", bevel open end, ea. Series A Syringe 250µl, RN - incl. Needle 0.029" x 0.012" x 2.25", bevel open end, ea. Series A Syringe 500µl, RN - incl. Needle 0.029" x 0.012" x 2.25", bevel open end, ea.
Part Number: VV-PS-010025
Part Number: VV-PS-010031
Part Number: VV-PS-010032
$ 84.35
$ 101.20
$ 106.80
 
Series A Syringe 1ml, RN - incl. Needle 0.029" x 0.012" x 2.25", bevel open end, ea. Series A Syringe 2ml, RN - incl. Needle 0.029" x 0.012" x 2.25", bevel open end, ea. Series A Syringe 5ml, RN - incl. Needle 0.029" x 0.012" x 2.25", bevel open end, ea.
Part Number: VV-PS-010033
Part Number: VV-PS-010034
Part Number: VV-PS-010035
$ 106.80
$ 106.80
$ 110.85
 
Series A Syringe 10ml, RN - incl. Needle 0.029" x 0.012" x 2.25", bevel open end, ea.
Part Number: VV-PS-010036
$ 110.85