The website uses cookies to allow us to better understand how the site is used. By continuing to use this site, you consent to this policy. Click to learn more.      

Rt-Alumina BOND/Na2SO4 PLOT Columns

Restek Rt-Alumina BOND columns are highly selective for C1–C5 hydrocarbons and separate all saturated and unsaturated hydrocarbon isomers above ambient temperatures. The reactivity of the aluminum oxide stationary phase is minimized, by deactivation with inorganic salts like KCl or Na2SO4, to improve column response for polar unsaturates, such as dienes, and the column's sensitivity (or response) ensures linear and quantitative chromatographic analysis for these compounds. Strong bonding minimizes particle generation and release, which allows valve switching with minimal risk to the injection or detection systems. And because they are stable up to at least 200 °C, Rt-Alumina BOND columns can be regenerated to restore full efficiency and selectivity by conditioning at their maximum temperature if water is adsorbed. High capacity and loadability give you exceptionally symmetrical peaks, making these columns ideal for volatile hydrocarbon separations at percent levels, as well as impurity analyses at ppm concentrations. Restek Rt-Alumina BOND PLOT columns are manufactured on fused silica tubing; select phases are also available on metal MXT tubing. To ensure reproducible retention times and predictable flow behavior column to column, each Rt-Alumina BOND column is extensively tested. A hydrocarbon test mix confirms proper phase retention and selectivity. To calculate k (retention or capacity factor), which is a measure of phase retention, 1,3-butadiene is used, while selectivity is measured using retention indices for propadiene and methyl acetylene. The resolution of trans-2-butene and 1-butene is also verified and, to measure efficiency, plates per meter are checked using 1,3-butadiene.

Na2SO4 deactivation

  • Acetylene and propadiene elute after butanes.
  • Best separation for butene isomers (impurities in butene streams).
  • Methyl acetylene elutes after 1,3-butadiene.
  • Cyclopropane (impurity in propylene) elutes well before propylene.
  • Stable to 200 °C.

Similar Phase(s): GS-Alumina,CP-Al2O3/Na2SO4, Alumina-Sulfate, AT-Alumina

Part Number

Products

Price

Qty / Buy

RT-19775 Rt-Alumina BOND/Na2SO4, 30m x 0.25mm ID, 4µm film, ea. price on request
RT-19757 Rt-Alumina BOND/Na2SO4, 30m x 0.32mm ID, 5.00µm film, ea. price on request
RT-19758 Rt-Alumina BOND/Na2SO4, 50m x 0.32mm ID, 5.00µm film, ea. price on request
RT-19755 Rt-Alumina BOND/Na2SO4, 30m x 0.53mm ID, 10µm film, ea. price on request
RT-19756 Rt-Alumina BOND/Na2SO4, 50m x 0.53mm ID, 10µm film, ea. price on request
PLOT Column Particle Trap
PLOT Column Particle Trap

Welcome at BGB