0.25mm ID HP-FFAP Columns




Agilent J&W HP-FFAP is designed primarily for the analysis of organic acids, free fatty acids, or samples that require quantitation of acidic impurities. The FFAP stationary phase is modified with acid to provide a very inert column that can accommodate the demanding analysis of acids dissolved in water. Free fatty acids up to C24 can be analyzed by HP-FFAP without costly and time-consuming derivatization. HP-FFAP does not require priming (several injections of acids) and so accurate results can be obtained quickly.

Note: We do not recommend the use of water or methanol to rinse HP-FFAP GC columns

  • Nitroterephthalic acid modified polyethylene glycol
  • High polarity
  • Designed for the analysis of volatile fatty acids and phenols
  • Replaces OV-351
  • Bonded and cross-linked; solvent rinsable
  • Close equivalent to USP Phase G35
  • Each Agilent J&W GC column is tested with the tightest industry QC specifications for column bleed, sensitivity, and efficiency to provide you utmost confidence in qualitative and quantitative results
  • For details about the QC test conditions including the test probe mixture and the resulting chromatogram, please refer to the Agilent J&W GC Column Performance Summary shipped with each GC column

Similar Phases: Stabilwax-DA, Nukol, 007-FFAP, BP21, AT-1000, OV-351


Part Number

Products

Price

Qty / Buy

AT-19091F-433 HP-FFAP 30m x 0.25mm ID, 0.25µm film, ea. price on request
AT-19091F-433E HP-FFAP 30m x 0.25mm ID, 0.2µm film 5"cage, ea. price on request