Liners

Description and Geometry Sketch OD (mm) ID (mm) Length (mm) Pack Size Part No.
Trace™ and Focus™ GC Liners

Splitless FocusLiner (for use with 70mm Needle)		 8 5 105 5 SGE-092045
1 SGE-09204501

Splitless FocusLiner with Top-end Restriction (for use with 70mm Needle)		 8 5 105 5 SGE-092046
1 SGE-09204601
25 SGE-09204625

Split FocusLiner (for use with 50mm Needle)		 8 5 105 5 SGE-092048

Splitless FocusLiner (for use with 50mm Needle)		 8 5 105 5 SGE-092049
1 SGE-09204901

Splitless with Single Taper		 8 3 105 5 SGE-092141
1 SGE-09214101
25 SGE-09214125

Trace 2000 PTV Liner		 2.75 1.75 120 5 SGE-092142

Splitless with Single Taper		 8 3 105 5 SGE-092144
1 SGE-09214401
25 SGE-09214425

Splitless, Straight-through Liner		 8 3 105 5 SGE-092147
1 SGE-09214701

SPME Liner		 8 0.8 105 5 SGE-092148
1 SGE-09214801

Split, Straight-through Liner		 8 5 105 5 SGE-092150
1 SGE-09215001

Sintered Glass, Large Volume Injection (LVI) Liner		 2.75 0.78/1.8 120 5 SGE-092155
1 SGE-09215501
25 SGE-09215525

ConnecTite Liner Standard		 8 5 105 5 SGE-092334
1 SGE-09233401

ConnecTite Liner Top Hole		 8 5 105 5 SGE-092335
1 SGE-09233501

ConnecTite Liner Bottom Hole		 8 5 105 5 SGE-092336
1 SGE-09233601

Description and Geometry Sketch OD (mm) ID (mm) Length (mm) Pack Size Part No.
For TRACE™ 1300

Split / Splitless FocusLiner®		 6.3 4 78.5 5 SGE-092002
1 SGE-09200201
25 SGE-092219

Split / Splitless Tapered FocusLiner®		 6.3 4 78.5 5 SGE-092003
1 SGE-09200301
25 SGE-092011

Split / Splitless FAST FocusLiner®		 6.3 2.3 78.5 5 SGE-092005
1 SGE-09200501
25 SGE-092008

Split / Splitless Tapered FAST FocusLiner®		 6.3 2.3 78.5 5 SGE-092111
1 SGE-09211101
25 SGE-092115

ConnecTite Liner Standard		 6.3 4 78.5 5 SGE-092324

ConnecTite Liner Top Hole		 6.3 4 78.5 5 SGE-092325

ConnecTite Liner Bottom Hole		 6.3 4 78.5 5 SGE-092326

4.0mm ID Split, straight-through liner		 6.3 4 78.5 5 SGE-092007
1 SGE-09200701
25 SGE-092222

4.0mm ID Split, with quartz wool		 6.3 4 78.5 5 SGE-092001
1 SGE-09200101
25 SGE-092220

4.0mm ID Split / Splitless with single taper		 6.3 4 78.5 5 SGE-092017
1 SGE-09201701
25 SGE-092229

4.0mm ID Split / Splitless with single taper and quartz wool		 6.3 4 78.5 5 SGE-092019
1 SGE-09201901
25 SGE-092218

4.0mm ID Split / Splitless with double taper		 6.3 4 78.5 5 SGE-092018
1 SGE-09201801
25 SGE-092230

1.2mm ID Direct, straight-through liner		 6.3 1.2 78.5 5 SGE-092016
1 SGE-09201601
25 SGE-092224

2.0mm ID Splitless (quartz), straight-through liner		 6.1 2 78.5 5 SGE-092004
1 SGE-09200401

2.0mm ID Splitless with Recessed Gooseneck		 6.3 2 78.5 5 SGE-092013
1 SGE-09201301

4.0mm ID Split / Splitless. Recessed Gooseneck with quartz wool		 6.3 4 78.5 5 SGE-092010
1 SGE-09201001
25 SGE-092223

Liner O-rings and Sealing Rings

Description Usage Pack Size Part No.
For 8000 & TRACE™ GCs
Graphite Sealing Ring 8 mm ID. Can be used at temperatures up to 450 °C. Suitable for use with liners SGE-092004 and SGE-09200401. 10 SGE-0726004
For TRACE™ 1300
Viton O-Ring Can be used at temperatures up to 300 °C. Suitable for liners with OD of 6.3 mm. 10 SGE-0726532
Graphite Sealing Ring Can be used at temperatures up to 450 °C. Suitable for all inlet liners above except SGE-092004 and SGE-09200401. 10 SGE-0726005
Graphite Sealing Ring Can be used at temperatures up to 450 °C. Suitable for use with liners SGE-092004 and SGE-09200401. 10 SGE-0726006