Liners

Description and Geometry Sketch	OD (mm)	ID (mm)	Length (mm)	Pack Size	Part No.
Trace™ and Focus™ GC Liners
Splitless FocusLiner (for use with 70mm Needle)	8	5	105	5	SGE-092045
				1	SGE-09204501
Splitless FocusLiner with Top-end Restriction (for use with 70mm Needle)	8	5	105	5	SGE-092046
				1	SGE-09204601
				25	SGE-09204625
Split FocusLiner (for use with 50mm Needle)	8	5	105	5	SGE-092048
Splitless FocusLiner (for use with 50mm Needle)	8	5	105	5	SGE-092049
				1	SGE-09204901
Splitless with Single Taper	8	3	105	5	SGE-092141
				1	SGE-09214101
				25	SGE-09214125
Trace 2000 PTV Liner	2.75	1.75	120	5	SGE-092142
Splitless with Single Taper	8	3	105	5	SGE-092144
				1	SGE-09214401
				25	SGE-09214425
Splitless, Straight-through Liner	8	3	105	5	SGE-092147
				1	SGE-09214701
SPME Liner	8	0.8	105	5	SGE-092148
				1	SGE-09214801
Split, Straight-through Liner	8	5	105	5	SGE-092150
				1	SGE-09215001
Sintered Glass, Large Volume Injection (LVI) Liner	2.75	0.78/1.8	120	5	SGE-092155
				1	SGE-09215501
				25	SGE-09215525
ConnecTite Liner Standard	8	5	105	5	SGE-092334
				1	SGE-09233401
ConnecTite Liner Top Hole	8	5	105	5	SGE-092335
				1	SGE-09233501
ConnecTite Liner Bottom Hole	8	5	105	5	SGE-092336
				1	SGE-09233601

Description and Geometry Sketch	OD (mm)	ID (mm)	Length (mm)	Pack Size	Part No.
For TRACE™ 1300
Split / Splitless FocusLiner®	6.3	4	78.5	5	SGE-092002
				1	SGE-09200201
				25	SGE-092219
Split / Splitless Tapered FocusLiner®	6.3	4	78.5	5	SGE-092003
				1	SGE-09200301
				25	SGE-092011
Split / Splitless FAST FocusLiner®	6.3	2.3	78.5	5	SGE-092005
				1	SGE-09200501
				25	SGE-092008
Split / Splitless Tapered FAST FocusLiner®	6.3	2.3	78.5	5	SGE-092111
				1	SGE-09211101
				25	SGE-092115
ConnecTite Liner Standard	6.3	4	78.5	5	SGE-092324
ConnecTite Liner Top Hole	6.3	4	78.5	5	SGE-092325
ConnecTite Liner Bottom Hole	6.3	4	78.5	5	SGE-092326
4.0mm ID Split, straight-through liner	6.3	4	78.5	5	SGE-092007
				1	SGE-09200701
				25	SGE-092222
4.0mm ID Split, with quartz wool	6.3	4	78.5	5	SGE-092001
				1	SGE-09200101
				25	SGE-092220
4.0mm ID Split / Splitless with single taper	6.3	4	78.5	5	SGE-092017
				1	SGE-09201701
				25	SGE-092229
4.0mm ID Split / Splitless with single taper and quartz wool	6.3	4	78.5	5	SGE-092019
				1	SGE-09201901
				25	SGE-092218
4.0mm ID Split / Splitless with double taper	6.3	4	78.5	5	SGE-092018
				1	SGE-09201801
				25	SGE-092230
1.2mm ID Direct, straight-through liner	6.3	1.2	78.5	5	SGE-092016
				1	SGE-09201601
				25	SGE-092224
2.0mm ID Splitless (quartz), straight-through liner	6.1	2	78.5	5	SGE-092004
				1	SGE-09200401
2.0mm ID Splitless with Recessed Gooseneck	6.3	2	78.5	5	SGE-092013
				1	SGE-09201301
4.0mm ID Split / Splitless. Recessed Gooseneck with quartz wool	6.3	4	78.5	5	SGE-092010
				1	SGE-09201001
				25	SGE-092223

Liner O-rings and Sealing Rings

Description	Usage	Pack Size	Part No.
For 8000 & TRACE™ GCs
Graphite Sealing Ring	8 mm ID. Can be used at temperatures up to 450 °C. Suitable for use with liners SGE-092004 and SGE-09200401.	10	SGE-0726004
For TRACE™ 1300
Viton O-Ring	Can be used at temperatures up to 300 °C. Suitable for liners with OD of 6.3 mm.	10	SGE-0726532
Graphite Sealing Ring	Can be used at temperatures up to 450 °C. Suitable for all inlet liners above except SGE-092004 and SGE-09200401.	10	SGE-0726005
Graphite Sealing Ring	Can be used at temperatures up to 450 °C. Suitable for use with liners SGE-092004 and SGE-09200401.	10	SGE-0726006

        
        $('#slideshow102').cycle({ 
          

          fx: 'fade'
                      ,

            timeout: 10000
                              

        });
        
      

        
        $('#slideshow151').cycle({ 
          

          fx: 'fade'
                      ,

            timeout: 10000
                                ,

            pager: '#slideshow_page_info151'
                    

        });
        
      

        
        $('#slideshow159').cycle({ 
          

          fx: 'fade'
                      ,

            timeout: 10000
                              

        });