Liners

Description and Geometry Sketch	OD (mm)	ID (mm)	Length (mm)	Pack Size	Part No.
Varian 1177 Liners
4.0mm ID Split, with quartz wool	6.3	4	78.5	5	SGE-092001
				1	SGE-09200101
				25	SGE-092220
Split / Splitless FocusLiner®	6.3	4	78.5	5	SGE-092002
				1	SGE-09200201
				25	SGE-092219
Split / Splitless Tapered FocusLiner®	6.3	4	78.5	5	SGE-092003
				1	SGE-09200301
				25	SGE-092011
Split / Splitless FAST FocusLiner®	6.3	2.3	78.5	5	SGE-092005
				1	SGE-09200501
				25	SGE-092008
4.0mm ID Split, straight-through liner	6.3	4	78.5	5	SGE-092007
				1	SGE-09200701
				25	SGE-092222
4.0mm ID Split / Splitless. Recessed Gooseneck with quartz wool	6.3	4	78.5	5	SGE-092010
				1	SGE-09201001
				25	SGE-092223
2.0mm ID Splitless with Recessed Gooseneck	6.3	2	78.5	5	SGE-092013
				1	SGE-09201301
1.2mm ID Direct, straight-through liner	6.3	1.2	78.5	5	SGE-092016
				1	SGE-09201601
				25	SGE-092224
4.0mm ID Split / Splitless with single taper	6.3	4	78.5	5	SGE-092017
				1	SGE-09201701
				25	SGE-092229
4.0mm ID Split / Splitless with double taper	6.3	4	78.5	5	SGE-092018
				1	SGE-09201801
				25	SGE-092230
4.0mm ID Split / Splitless with single taper and quartz wool	6.3	4	78.5	5	SGE-092019
				1	SGE-09201901
				25	SGE-092218
Split / Splitless Tapered FAST FocusLiner®	6.3	2.3	78.5	5	SGE-092111
				1	SGE-09211101
				25	SGE-092115

Description and Geometry Sketch	OD (mm)	ID (mm)	Length (mm)	Pack Size	Part No.
Varian 1075/1077 Liners
Split with Quartz Wool	6.3	4	72	5	SGE-092021
				1	SGE-09202101
				25	SGE-09222125
Split FocusLiner	6.3	4	72	5	SGE-092022
				1	SGE-09202201
Splitless, Slots at Both Ends	6.3	2	74	5	SGE-092024
				1	SGE-09202401
				25	SGE-092228
Split, Tapered FocusLiner	6.3	4	72	1	SGE-09202501
Splitless FocusLiner with Top-end Restriction	6.3	4	74	1	SGE-09202601
Split FocusLiner with Top-end Restriction	6.3	4	72	5	SGE-092028
				1	SGE-09202801
Split, FAST FocusLiner	6.3	2.3	72	1	SGE-09211301
ConnecTite Liner Standard	6.3	4	72	5	SGE-092339
				1	SGE-09233901
ConnecTite Liner Top Hole	6.3	4	72	5	SGE-092340
				1	SGE-09234001
ConnecTite Liner Bottom Hole	6.3	4	72	5	SGE-092341
				1	SGE-09234101

Description and Geometry Sketch	OD (mm)	ID (mm)	Length (mm)	Pack Size	Part No.
Varian 1078/1079 Liners
Straight-through Liner	5	0.5	54	5	SGE-092031
				1	SGE-09203101
Split / Splitless Tapered FocusLiner	5	3.4	54	5	SGE-092036
				1	SGE-09203601
Split / Splitless FocusLiner	5	3.4	54	5	SGE-092037
				1	SGE-09203701
				25	SGE-09203725
Split / Splitless with single taper	5	3.4	54	5	SGE-092038
				1	SGE-09203801
				25	SGE-09203825
Splitless with Single Taper	5	2	54	5	SGE-092039
				1	SGE-09203901
SPME liner	5	0.75	54	5	SGE-092117
Sintered Glass, Large Volume Injection (LVI) Liner	5	1.8/3.4	54	5	SGE-092245
				1	SGE-09224501
				25	SGE-09224525

Description and Geometry Sketch	OD (mm)	ID (mm)	Length (mm)	Pack Size	Part No.
Varian 1093/1094 Liners
SPI Liner, (Restriction = 0.25mm)	4.6	0.5	54	5	SGE-092027
				1	SGE-09202701
SPI Liner, (Restriction = 0.25mm)	4.6	0.8	54	5	SGE-092030
				1	SGE-09203001
SPI Liner, (Restriction = 0.5mm) for 0.53mm ID On-column	4.6	0.8	54	5	SGE-092034
				1	SGE-09203401
				25	SGE-09203425

Liner O-rings and Sealing Rings

Description	Usage	Pack Size	Part No.
Viton O-ring for 1177 Injector	Can be used at temperatures up to 300 °C.	10	SGE-0726532
Graphite Sealing Ring for 1075 & 1077 Injectors	Can be used at temperatures up to 450 °C.	10	SGE-072601
Graphite Sealing Ring for 1078 & 1079 Injectors	Can be used at temperatures up to 450 °C.	10	SGE-0726217

        
        $('#slideshow102').cycle({ 
          

          fx: 'fade'
                      ,

            timeout: 10000
                              

        });
        
      

        
        $('#slideshow151').cycle({ 
          

          fx: 'fade'
                      ,

            timeout: 10000
                                ,

            pager: '#slideshow_page_info151'
                    

        });
        
      

        
        $('#slideshow159').cycle({ 
          

          fx: 'fade'
                      ,

            timeout: 10000
                              

        });