Liners

Description and Geometry Sketch OD (mm) ID (mm) Length (mm) Pack Size Part No.
Deactivated Liner for Agilent 5890, 6850, 6890, 7890 and HP4890

4.0mm ID Split, with quartz wool		 6.3 4 78.5 5 SGE-092001
1 SGE-09200101
25 SGE-092220

Split / Splitless FocusLiner®		 6.3 4 78.5 5 SGE-092002
1 SGE-09200201
25 SGE-092219

Split / Splitless Tapered FocusLiner®		 6.3 4 78.5 5 SGE-092003
1 SGE-09200301
25 SGE-092011

2.0mm ID Splitless (quartz), straight-through liner		 6.1 2 78.5 5 SGE-092004
1 SGE-09200401

Split / Splitless FAST FocusLiner®		 6.3 2.3 78.5 5 SGE-092005
1 SGE-09200501
25 SGE-092008

4.0mm ID Split, straight-through liner		 6.3 4 78.5 5 SGE-092007
1 SGE-09200701
25 SGE-092222

4.0mm ID Split / Splitless. Recessed Gooseneck with quartz wool		 6.3 4 78.5 5 SGE-092010
1 SGE-09201001
25 SGE-092223

2.0mm ID Splitless with Recessed Gooseneck		 6.3 2 78.5 5 SGE-092013
1 SGE-09201301

1.2mm ID Direct, straight-through liner		 6.3 1.2 78.5 5 SGE-092016
1 SGE-09201601
25 SGE-092224

4.0mm ID Split / Splitless with single taper		 6.3 4 78.5 5 SGE-092017
1 SGE-09201701
25 SGE-092229

4.0mm ID Split / Splitless with double taper		 6.3 4 78.5 5 SGE-092018
1 SGE-09201801
25 SGE-092230

4.0mm ID Split / Splitless with single taper and quartz wool		 6.3 4 78.5 5 SGE-092019
1 SGE-09201901
25 SGE-092218

4.0mm ID Split / Splitless with single taper and quartz wool, pre-fitted o-ring and TI deactivation		 6.3 4 78.5 5 SGE-09262019
1 SGE-0926201901

Split / Splitless Tapered FAST FocusLiner®		 6.3 2.3 78.5 5 SGE-092111
1 SGE-09211101
25 SGE-092115

ConnecTite Liner Standard		 6.3 4 78.5 5 SGE-092324

ConnecTite Liner Top Hole		 6.3 4 78.5 5 SGE-092325

ConnecTite Liner Bottom Hole		 6.3 4 78.5 5 SGE-092326
Agilent Liner Removal Tool 1 SGE-092921
Agilent Packed Column Liner

1.8mm ID Packed column liner for Agilent Technology Models 5880, 5890, 6890		 3 1.8 92 5 SGE-092234
1 SGE-09223401
25 SGE-092235
SGE liner for AC Control Injector

1.6mm ID AC Control Sim Dist liner. Programmed Injector (not deactivated)		 3 1.6 73 5 SGE-092210
1 SGE-09221001
25 SGE-092211
OSGE liners for Gerstel CIS 4 Injector

1.8mm ID, Sintered Glass. Large Volume Injection (LVI)		 3 1.8 71 5 SGE-092243
1 SGE-09224301

Single Baffle		 3 1.8 71 5 SGE-092246
1 SGE-09224601

Liner O-rings and Sealing Rings

Description Usage Pack Size Part No.
Viton O-ring Can be used at temperatures up to 300 °C. Suitable for liners with OD of 6.3 mm. 10 SGE-0726532
Graphite Sealing Ring Can be used at temperatures up to 450 °C. Suitable for all inlet liners above except 092004 and 09200401. 10 SGE-0726005
Graphite Sealing Ring Can be used at temperatures up to 450 °C. Suitable for use with liners 092004 and 09200401. 10 SGE-0726006