- CE (Capillary Electrophoresis) Tubing
- MEPS (Micro Extraction by Packed Sorbent)
- MyCapLC Kits
- PEEK HPLC Fittings
- PEEKLok Connectors
- ProteCol Bio-Inert UHPLC Column Hardware
- ProteCol HPLC Unions
- Tubing
- Gas Filters and Accessories
- GC and LC Syringes
- GC Columns
- GC Connectors
- GC Supplies by Instrument
- Micro Control Valves
Liners
| Description and Geometry Sketch | OD (mm) | ID (mm) | Length (mm) | Pack Size | Part No. |
|---|---|---|---|---|---|
| Deactivated Liner for Agilent 5890, 6850, 6890, 7890 and HP4890 | |||||
 4.0mm ID Split, with quartz wool |
6.3 | 4 | 78.5 | 5 | SGE-092001 |
| 1 | SGE-09200101 | ||||
| 25 | SGE-092220 | ||||
 Split / Splitless FocusLiner® |
6.3 | 4 | 78.5 | 5 | SGE-092002 |
| 1 | SGE-09200201 | ||||
| 25 | SGE-092219 | ||||
 Split / Splitless Tapered FocusLiner® |
6.3 | 4 | 78.5 | 5 | SGE-092003 |
| 1 | SGE-09200301 | ||||
| 25 | SGE-092011 | ||||
 2.0mm ID Splitless (quartz), straight-through liner |
6.1 | 2 | 78.5 | 5 | SGE-092004 |
| 1 | SGE-09200401 | ||||
 Split / Splitless FAST FocusLiner® |
6.3 | 2.3 | 78.5 | 5 | SGE-092005 |
| 1 | SGE-09200501 | ||||
| 25 | SGE-092008 | ||||
 4.0mm ID Split, straight-through liner |
6.3 | 4 | 78.5 | 5 | SGE-092007 |
| 1 | SGE-09200701 | ||||
| 25 | SGE-092222 | ||||
 4.0mm ID Split / Splitless. Recessed Gooseneck with quartz wool |
6.3 | 4 | 78.5 | 5 | SGE-092010 |
| 1 | SGE-09201001 | ||||
| 25 | SGE-092223 | ||||
 2.0mm ID Splitless with Recessed Gooseneck |
6.3 | 2 | 78.5 | 5 | SGE-092013 |
| 1 | SGE-09201301 | ||||
 1.2mm ID Direct, straight-through liner |
6.3 | 1.2 | 78.5 | 5 | SGE-092016 |
| 1 | SGE-09201601 | ||||
| 25 | SGE-092224 | ||||
 4.0mm ID Split / Splitless with single taper |
6.3 | 4 | 78.5 | 5 | SGE-092017 |
| 1 | SGE-09201701 | ||||
| 25 | SGE-092229 | ||||
 4.0mm ID Split / Splitless with double taper |
6.3 | 4 | 78.5 | 5 | SGE-092018 |
| 1 | SGE-09201801 | ||||
| 25 | SGE-092230 | ||||
 4.0mm ID Split / Splitless with single taper and quartz wool |
6.3 | 4 | 78.5 | 5 | SGE-092019 |
| 1 | SGE-09201901 | ||||
| 25 | SGE-092218 | ||||
|
4.0mm ID Split / Splitless with single taper and quartz wool, pre-fitted o-ring and TI deactivation |
6.3 | 4 | 78.5 | 5 | SGE-09262019 |
| 1 | SGE-0926201901 | ||||
 Split / Splitless Tapered FAST FocusLiner® |
6.3 | 2.3 | 78.5 | 5 | SGE-092111 |
| 1 | SGE-09211101 | ||||
| 25 | SGE-092115 | ||||
 ConnecTite Liner Standard |
6.3 | 4 | 78.5 | 5 | SGE-092324 |
 ConnecTite Liner Top Hole |
6.3 | 4 | 78.5 | 5 | SGE-092325 |
 ConnecTite Liner Bottom Hole |
6.3 | 4 | 78.5 | 5 | SGE-092326 |
| Agilent Liner Removal Tool | 1 | SGE-092921 | |||
| Agilent Packed Column Liner | |||||
 1.8mm ID Packed column liner for Agilent Technology Models 5880, 5890, 6890 |
3 | 1.8 | 92 | 5 | SGE-092234 |
| 1 | SGE-09223401 | ||||
| 25 | SGE-092235 | ||||
| SGE liner for AC Control Injector | |||||
|
1.6mm ID AC Control Sim Dist liner. Programmed Injector (not deactivated) |
3 | 1.6 | 73 | 5 | SGE-092210 |
| 1 | SGE-09221001 | ||||
| 25 | SGE-092211 | ||||
| OSGE liners for Gerstel CIS 4 Injector | |||||
 1.8mm ID, Sintered Glass. Large Volume Injection (LVI) |
3 | 1.8 | 71 | 5 | SGE-092243 |
| 1 | SGE-09224301 | ||||
 Single Baffle |
3 | 1.8 | 71 | 5 | SGE-092246 |
| 1 | SGE-09224601 | ||||
Liner O-rings and Sealing Rings
| Description | Usage | Pack Size | Part No. |
|---|---|---|---|
| Viton O-ring | Can be used at temperatures up to 300 °C. Suitable for liners with OD of 6.3 mm. | 10 | SGE-0726532 |
| Graphite Sealing Ring | Can be used at temperatures up to 450 °C. Suitable for all inlet liners above except 092004 and 09200401. | 10 | SGE-0726005 |
| Graphite Sealing Ring | Can be used at temperatures up to 450 °C. Suitable for use with liners 092004 and 09200401. | 10 | SGE-0726006 |
Phone: +41 (0) 61 991 00 46
Fax: +41 (0) 61 991 00 25
Index
Powered by X-Cart shopping cart software
Copyright © 2005-2025 BGB Analytik AG